BALLUFF BIS-V Commands

The connector supports following commands:

• ReadUserData.{x}
• WriteUserData.{x}

Reading User Data

Reads the user data from the RFID tag.

The command needs following inputs:

Argument	Description	Data Type
Size	Size of the data in bytes	System.Int32

The command needs following outputs:

Argument	Description	Data Type
TagId	Tag id	System.String
Data	User Data	System.Byte[]

{
  "Id": "143FB14C-0509-442F-B38B-1FDADD372E0E",
  "Name": "ReadUserData",
  "Type": "CommandNode",
  "Address": "ReadUserData.1",
  "Arguments": [
    {
      "Name": "Size",
      "Type": "Input",
      "DataType": "System.Int32"
    },
    {
      "Name": "TagId",
      "Type": "Output",
      "DataType": "System.String"
    },
    {
      "Name": "Data",
      "Type": "Output",
      "DataType": "System.Byte[]"
    }
  ]
}

Writing User Data

Writing the user data to RFID tag.

The command needs following inputs:

Argument	Description	Data Type
TagId	Tag id (Optional)	System.String
Data	User Data	System.Byte[]

If the TagId is set, the user-data is only written to the RFID if the TagId matches.

{
  "Id": "179035F5-68E8-4098-85FA-ED2567B56D0B",
  "Name": "WriteUserData",
  "Type": "CommandNode",
  "Address": "WriteUserData.1",
  "Arguments": [
    {
      "Name": "TagId",
      "Type": "Input",
      "DataType": "System.String"
    },
    {
      "Name": "Data",
      "Type": "Input",
      "DataType": "System.Byte[]"
    }
  ]
}