Skip to main content
Version: 2.7

Sinumerik Driver Configuration

Plugin Configuration​

The plugin configuration file is named settings.json located in <install directory>\Config\HumanOS.UHAL.SinumerikControl\. It contains all global settings of the plugin.

See Generic Plugin Configuration for more details.

Device Information File​

The device information file is used to configure the access to the Sinumerik controls. It contains:

  • Id: unique device id (GUID), which MUST match the device license id.
  • DriverId: B657332C-A383-47EE-BEDD-6156AF9C9083
  • Address: Connection address
  • Data Access

See Device Information Model for more details.

Connection Address​

The Sinumerik Driver needs an Endpoint specification. Use:

  • s840d.sl://192.168.0.80 to connect to a Sinumerik 840D SolutionLine
  • s840d.pl://192.168.0.80 to connect to a Sinumerik 840D PowerLine

To use a different port instead of 102:

  • s840d.pl://192.168.0.80:1391 to connect to a Sinumerik 840D PowerLine through port 1391

If the MPI/profibus address differs from the standard setting use following parameters:

  • s840d.pl://192.168.0.80?nck-mpi=13&plc-rack=0&plc-slot=13 to set
    • nck-mpi address to 13
    • plc-rack to 0 (optional)
    • plc slot to 13 (optional)
NOTE

Further information about connectivity, see chapter Sinumerik Connectivity.

Trouble shooting connection failures, see chapter Troubleshooting.

Property TcpTimeout​

Network Timeout property in Milliseconds, default is 5s. Example 10s:

{
  "Name": "TcpTimeout",
  "Value": 10000,
  "DataType": "System.Int32"
}